Skip to main content

The Kadant Blog

In Mill Design™ Service with 3D Laser Technology is Essential for Your Mill

Casey MC SMI sat down with Casey McDaniel to better understand In Mill Design (IMD) service and the benefits for pulp and paper mills. Nothing is more valuable than hands-on experience from an expert. Casey is the Midwest District Sales Manager and has worked for Kadant Solutions for eight years. Casey graduated from the paper science and engineering program at the University of Wisconsin at Stevens Point.

V: What is In Mill Design service or IMD?

C: In Mill Design service is when you have the district sales manager, design, and/or application engineer working with mill personnel on-site to develop customized options for doctoring, cleaning, and filtration systems. Often IMD is used for a critical position such as press rolls, center press, and the Yankee; however, it can be extremely beneficial for all projects.

V: Can you walk me through an average IMD service call?

ScanInMillDesign 20190509143307 0C: First, we start with a kickoff meeting with all personnel involved in the project. During this meeting, we discuss initial design ideas and define the project scope. This provides a good road map for the shutdown the next day. Next, at the shutdown, the engineer works with mill personnel to collect measurements and data to aid in the design. After the shutdown, the engineer develops the design. Finally, a review meeting is scheduled with all personnel involved with the project to discuss the design and begin the approval process.

V: What are the expectations of the mill during an IMD service call?

C: For the mill to reap all the benefits of IMD service, it’s essential the mill’s project production, engineering, and maintenance teams are present for the kick-off and review meetings. This allows for the greatest amount of collaboration between our service team and mill personnel. From our perspective, the process goes much smoother if you have key people engaged from the start.

V: How does IMD differ from a decade ago?

360scangraphic SMC: In Mill Design service began 15 years ago and has changed dramatically with the development of 3D laser scanning technology. A decade ago, the district sales manager would take the mill dimensions and send them to the engineer to decipher and then customize a design without seeing the application. Today, engineers can conduct a 360° scan of equipment to produce an immediate 3D model. Not only does this provide more accuracy, it cuts time from weeks to days in terms of presenting design options.

V: What have been the biggest benefits of In Mill Design service that you’ve witnessed in the field?

C: Overall, the biggest benefit of IMD is the elimination of major fit-up mistakes when the mill goes to install the new equipment. Because collaboration is the focus of IMD, mill personnel can see how the equipment will operate and can voice their thoughts and opinions right away. This significantly cuts down on lead time for the entire project.

  • Written by:
    Vicki Hunsberger

    Vicki Hunsberger

    Marketing Manager, Kadant Solutions

© Kadant Inc.