Fluid Handling

Kadant Johnson’s New Website Focuses on Fluid Handling Customers

The new fluidhandling.kadant.com website is dedicated exclusively to Kadant Johnson and Kadant Unaflex products and services.

Written by Casey Beck on December 03, 2020.

Advantages of Metal Bellows Expansion Joints

Metal bellows are designed to compensate for thermal movement of piping systems and take up far less space than piping bends and expansion loops require.

Written by Jeff Viau on November 24, 2020.

Case Study: Liqui-Mover® Pump Succeeds Where Electric Condensate Pumps Failed

Kadant Johnson helped a Fortune 100 company with subsequent pump failures find a solution that would never fail.

Written by Erich Bernhardt on October 20, 2020.

Pressure Vessel Quality is More Than Skin Deep – NDT Inspectors Share Their Insights

Kadant Johnson’s Joe Jarvis, ASNT NDT level III, and Mark Bays, NDT services manager, share the top five design elements to look for when selecting a pressure vessel.

Written by Casey Beck, Zod Zandi on September 15, 2020.

Torquing and Retorquing Best Practices for Kadant Unaflex Expansion Joints

Proper handling and installation of expansion joints are crucial to the performance and durability of the expansion joint.

Written by Jason Pruitt on August 25, 2020.

Welcome to the New Kadant Website Experience

Kadant's new website experience consists of a redesigned kadant.com and three product specific websites that focus on our Doctoring, Cleaning, and Filtration and Fluid Handling product lines within our Flow Control segment and our Fiber Processing within our Industrial Processing segment.

Written by Kandi Hagenbuch on November 25, 2020.

What Torque Is Required to Mount Rotary Pressure Joints? - The Most Frequent of All FAQs

The most common question I receive is “How much torque is required to mount rotary pressure joints?” The answer is simple but first let me give you some background.

Written by Rick Lull on November 17, 2020.

Troubleshooting Rubber Expansion Joint Failures

Rubber expansion joints are susceptible to failure when misused or not properly installed and the most common failures result from the expansion joint being misused.

Written by Jason Pruitt, Ciera Pruitt on September 22, 2020.

Corrugated Board Production Quality Defects Related to Heat Transfer

The increased market demand for lighter weight corrugated board poses unique challenges for older machines that were primarily designed for larger flutes sizes using heavier liner and fluting mediums.

Written by Mohammed Qasim on September 01, 2020.

Corrugator Quality Control Packages Require Responsive Steam Systems

A Kadant Johnson steam system upgrade provides the hardware and software controls needed to enable high-speed corrugators to make flat board.

Written by Casey Beck on August 18, 2020.

The Kadant Blog

Fluid Handling