The Kadant Blog

Case Study: Steam Trap Upgrades at Corrugated Packaging Plant Improve Heat Transfer and Extend Life

Challenge

A corrugated packaging plant in Kentucky was experiencing significant condensate buildup in its heated rolls. Several steam traps used to remove condensate from the rolls were found to have failed. None of the steam traps were equipped with protective strainers or blowdown valves and had become clogged with debris causing the condensate build-up. The excess condensate was restricting heat transfer through the rolls and in the hot plate zones.

Solution

Kadant Johnson worked with the maintenance and production supervisors to determine the best solution for this identified problem. Kadant Johnson’s 45-Series™ steam trap banks were selected to upgrade the existing trap system. The steam traps carry a five-year “no-touch” warranty. The installation occurred on all three single facers including the preheaters, the triple stack machine, and the three hot plate sections. Each bank was installed with steam traps, isolation ball valves, check valves, strainers, and blowdown valves with drain piping going to a safe location.

Results

The production supervisor saw immediate gains in heat transfer and was able to reduce the amount of wrap arm on the machine to manage the excess heat. The maintenance manager was able to establish a preventive maintenance schedule using the blowdown system to extend the life of the steam traps, keep condensate flowing out of the heated rolls, and improve the overall health of the steam system.

  • Written by:
    Casey Beck

    Casey Beck

    Product Marketing and Applications Manager, Kadant Johnson

© Kadant Inc.

Privacy  |  Terms