Case Study - PT Rotary Joint with Shield
PT rotary joint with integral protective shield keeps debris out of the sealing area and enhances safety around the rotary joint.
Read moreWelcome to the Kadant Toolbox, the official blog of Kadant. We know running an efficient operation with a reliable process is what your operational performance relies on, so we put our team to work for you to provide instruction, best practices, and technical know-how.
Latest Articles
Steam Hammer in Continuous Casting of Steel
Continuous casting of steel is the process where molten steel is solidified into a semi-finished billet, bloom, or slab for subsequent rolling in the finishing mills. Effective water cooling of continuous casting rolls is critical. Any drop in water pressure, even from a leaking hose, can result in reduced water flow causing water to remain in the rolls longer than recommended.
Read moreWritten by Frank Marsden on November 10, 2015.
Steam, Paper Drying, and the Bottom Line
Because energy drives the papermaking process, steam is found in many energy streams in a paper mill. Steam is used to cook fibers for improved sheet strength, heat stock for improved drainage, heat process air for ventilation, heat dryers to dry paper, and selectively heat the web for improved gloss and smoothness.
Read moreWritten by Wes Martz on October 13, 2015.
Vibration Monitoring in Tissue Manufacturing
One of the most dreaded words uttered in a tissue manufacturing facility is “chatter”. The thought of Yankee chatter makes many vendors, suppliers, and operators queasy. As tissue mill technology has evolved with improved controls, hardware, drives, clothing, and chemistry, Yankee speeds have increased leading to production limitations of the asset.
Read moreWritten by Jack Allen on August 25, 2015.
Tissue Creping: An Interview with Jack Allen
I sat down with Kadant’s Jack Allen, tissue applications manager, to better understand the tissue creping process and unique industry challenges. Jack’s work at Kadant focuses primarily on providing training to sales and service associates about the chemistry used in tissue manufacturing and supporting field trials of the new CeraEdge™ creping blade.
Read moreWritten by Vicki Hunsberger on June 02, 2015.
Fluid Filtration 101: Understanding the Basics
If you have water or fluid in your process system, it’s likely you have solids build-up. These solids can cause difficulty in the production process. Basic knowledge about particle size measurement, total suspended solids, fluid types, and filtration screen basics is helpful when determining the correct filtration system to implement or when troubleshooting a problematic system.
Read moreWritten by Dave McGowan on December 01, 2015.
Doctoring Tips from the Experts
I had the opportunity to sit down with Jon Olszak and Mike Six, regional applications managers for doctoring, to discuss doctor blade tips and applications for the pulp and paper industry. Jon and Mike have over 35 years of doctoring and rolling cleaning experience.
Read moreWritten by Vicki Hunsberger on November 03, 2015.
Product Evolution in Effective Water and Fiber Recovery
During the past four decades, Kadant has supplied over 1,000 gravity and vacuum-assisted strainers to the pulp and paper industry. As the pulp and paper industry evolved, the need for a product with the advantages of traditional strainers that incorporated higher reliability, a simple design, and less maintenance was recognized.
Read moreWritten by Marcelo DeBoni on September 08, 2015.
Continuous Blade Systems = Quick Roi
What do food, chemicals, cosmetics, pharmaceuticals, and tobacco have in common with the paper towels sitting on your kitchen counter? The answer lies in how they are manufactured.
Read moreWritten by Aaron Hickman on June 30, 2015.
Fabric and Roll Cleaning Pilot Plant Provides Useful Trial Insights
The papermaker is faced with many challenges when trying to keep fabrics and roll covers clean. Contaminants are deposited and consequently forced into the void volume of fabrics, reducing permeability, creating holes in the sheet, and other runnability issues. In addition, deposits on roll surfaces cause picking or sheet marking.
Read moreWritten by Steve Fielding on May 06, 2015.
